Huawei has launched several sub-models of B315 ex. B315s-22, B315s-936, B315s-607 etc. All these sub-models supports a download speed of up to 150 Mbps and an upload of 50 Mbps. Our team has got success in unlocking all these sub-models and today, I am going to share the process to unlock B315s-22 and B315s-936 Router and other submodels. This app is capable of unlocking B315 routers having the latest versions and is tested up to version 21.329.xx.xx.xx.
Update 1: This APP can also unlock B315s-607 of VividWireless, Australia having firmware version 21.323.03.00.1385 and 21.327.01.00.1385 or lower.
Update 2: B315s-22, MTN Ivory Coast, Cote D’Ivoire having firmware version 21.328.01.00.334 or lower can also be unlocked using the same APP.
Update 3: B315s-22 of Smile Tanzania and B315s-22 of 3 Ireland can be successfully unlocked.
Unlock B315s-936 and B315s-22 Router
Download and install drivers from this link.
Steps to unlock Huawei B315s-22 and B315s-936 Router:
- Install drivers and it is recommended to restart the computer to avoid any error in unlocking.
- Turn OFF your B315s router and unscrew it. Don’t forget to disconnect all cables before unscrewing.
- Plug in the USB cable in the router.
- Shot the two points marked as “Point 1” and “Point 2” as shown in the picture given below. You can use a tweezer or any wire to shot them.
- After joining these points and without releasing them insert power cable. Release the shot cable/tweezer. The device manager should show a new com port. If device manager is not showing any COM port like the one in the image below, you will have to repeat the steps 2 and 3.
Important: If your operating system is Windows 10. Download the below file, extract it using any extracting utility like WinRar and run it. Restart the computer after executing the file.
Download B315s Unlocking App. Extract it using WinRar or any other utility and open it. Click the login button (username and password is unlockmyrouter).
Select Apply Loader and click Submit. Enter the bootloader code which you have received from us after the payment.
You will get the code acceptance message as given in the below image.
Click Ok. You will see the loader installation progress in the APP.
After getting the message “Loder installed successfully”, wait for around 1-2 minutes and check the Device Manager again. It should now show two com ports as given in the picture below. If your computer is showing something else in place of ports then you might be missing drivers.
If you are having trouble in driver installation, refer to this post.
Check, if the ports are generated, select Flash Firmware option and click Submit button. It is highly recommended not to open any other applications until you see the message “Flashing Completed Successfully”.
After getting the successful flashing message, remove the USB cable and power cable also. Insert any incompatible SIM in your B315 router and turn it ON. Don’t connect the USB cable now.
Close and reopen the unlocking APP and login again.
After Successful login, connect B315 router using LAN cable, open the web browser and navigate to http://192.168.8.1.
Your browser will show an option to enter the unlock code. Close the web browser. Select “Unlock Router” option in the unlocking APP. It will ask for the unlock code, enter the code which you have received via email.
Click Ok. You will get a code acceptance message.
Click OK again, your B315 router will automatically restart so that the new settings can be applied.
Your Huawei B315 router is now unlocked and will work with any SIM worldwide.
Unlock code is not free and can be received by paying 6 USD. After successful payment, you will receive the code via email.